The 3-phase Induction
motors : / IP 55 protection
level, F class insulation
:
3MA
series (Aluminium
die-cast frame):
With pole number 2,
4,6 and 8 and with
output power from
0,12 kW up to 11 kW.
MA
Series (Aluminium
die-cast frame):
With single speed
pole numbers 2, 4,
6 and 8 and others
by request and in
two speed version,
either single or double
winding. Available
output power from
1,5 kW up to 37 kW.
1M
& 1M-1 Series
( Cast Iron frame):
With pole number 2,
4,6 and 8 and with
output power from
4 kW up to 315 kW.
M
series (Cast iron
frame ):
With single speed
pole numbers 2, 4,
6 and 8 and others
by request and in
two speed version,
either single or double
winding. Available
output power from
18,5 kW up to 1000
kW.
DC
motors CC series :
4-pole motors.
Output power from
0,4 kW up to 865 kW.
HV
series, type AMH :
Fabricated steel motors;
Pole numbers : 2,4,6,
8, with Output power
up to 1600 kW and
customized versions.
Selfbraking
Motros: M2AO –
MAO series(DC Brakes);
M2AY – M2Y series(AC
Brakes) :
Aluminium die-cast
frame/ C.I. Frame
;Pole Numbers: 2,
4, 6 and 8
For DC Braking : Output
power from 0.04 kW
up to 18,5 kW ( or
bigger by request
).
For AC Braking : output
power from 0,06 kW
up to 37 kW ( or bigger
by request ).
Special
Motors : Following
main options are available
: • Forced
ventilation , in-line
or radialy fit by
request. •
Encoder , single or
double. •
Tachometer dynamo.
Vectorial
Motors ( Drive AX
series) :
They are fundamentally
destined to Frequency
Converter supply running
in those modern applications
where high speed and
dynamics are needed.
The
motors are built to
comply with current
International Standards:
•
IEC 34, 72 •
VDE 0530 •
DIN 42673, 42677
• BS 4999,5000
• NF C 51
• AS 1359
• ISO 2373
Standard motors are
featured by: •
IP 55 •
IC 0141
Geared
Boxes:
Cast
iron in-line gearboxes,
RE & RKE Series:
Input power upto 90
kW; Output torque
upto 19000Nm
Aluminium
in-line gearboxes,
RA series :
Input power upto 4kW;
Output torque upto
460Nm
Cast
iron in-line gearboxes
, RG series :
Input power upto 4
kW; Output torque
upto 460Nm
Parallel-shaft
cast iron gearboxes,
PE and PEK series
: Input power
upto 33kW; Output
torque upto 3000Nm
Parallel-shaft
gearboxes RXP series
: They are
manufactured in 1,
2, 3 or 4 ( with pre-reduction
gear ) reduction steps,
for input power from
0,7 kW up to approx.
9300 kW. Output torque
goes from 1400 Nm
up to 692.000 Nm.
Bevel
type cast iron gearboxes,
A series :
Input power upto 37kW;
Output torque upto
2850Nm.
Bevel
type cast iron gearboxes,
RXO and RXV series
:They are
manufactured in 1,
2, 3 reduction steps,
for input power from
0,8 kW up to approx.
2300 kW. Output torque
goes from 1100 Nm
up to 692.000 Nm,
Worm-wheel
gearboxes :
Die cast Aluminium
or Cast Iron ( size
110 ) housing. Input
power upto 4kW; Output
torque upto 850Nm